Offering the world superior CNC tooling and robotics solutions from China
0
image
image
image
image
Ball End Mill

CNC Carbide 4F Ball End Mill HRC65 Milling Cutter

JR-116
We provide high-quality tungsten carbide end mills with the following advantages:

Micro grain raw material

Grain size:  0.6μm

Co   12.5%

TRS   >3600 N/mm2

Hardness   HRA 91.8-92.5

Workpiece   HRC45-50   HRC55-60   HRC65

Helix angle   30°

Diameter of cutting edge   0.2-0.9 mm; 1-20 mm

Diameter of rods   4-20 mm

Length   50-150 mm

Cutting Form   Flat, Square, Ball nose, Corner Radius, Taper Flute, etc

Flutes No.   2/4F
minimum order
1 piece
Quantity:
US $2.39 / piece
Unable to ship to shipping address, please feedback to us
Contact Now
add to cart
Buy Now
  • You can only upload 1 attachments at most
  • Supported formats: PDF,JPG,PNG,EXCEL,WORD,STP,IGS,DWG,DXF,PDF,STEP
  • The size of the uploaded file should not exceed 10MB

Ball End Mill are used for drilling shallow holes, slotting a channel where a flat bottom is not required or most commonly used to produce multi-dimensional contours in molds or dies. The design of Ball End Mill forms a hemispherical cutting action identical to the diameter of the tool. Because of the shapes required in these products it’s common  that multi axis machining centers are used for this work.  They can also be used in a secondary way to form a radius at the juncture of perpendicular surfaces.  A Ball End Mill will produce a radius one half the diameter of of the tool used. A Ball End Mill with a radius ground on the corner can provide a small radius at the juncture if reduction of stress is the desired objective.

The design of a 2F Ball End Mill allows for plenty of chip evacuation making them most effective in contouring deep pockets in molds and dies. Four or more fluted ball nose end mills have less chip evacuation due to their design but with multiple cutting edges they can produce very smooth finish by running lighter chip loads, without sacrificing a high rate of production.
Ball End Mill